PRODUCTS
FENCE PANEL CLIP
These simple and effective clips overcome the problem of split panel battens and eliminate skew nailing.
Available Size: 47mm
0.9mm pre galvanised mild steel
FENCE POST SPIKE
Erect fence posts in minutes without digging holes or mixing concrete.
Drive the post support into the ground with a sledge hammer and the 3-fin steel spike will provide secure anchorage.
Available Size: 50 x 50mm, 75 x 75mm and 100 x 100mm
Manufactured from galvanised mild steel and powder coated for long life.
ARRIS RAIL
Used to join a new arris rail to a wooden post or to repair a broken wooden arris rail.
Available Size: 300mm x 125mm
0.8mm pre galvanised mild steel
FENCE POST BOLT DOWN
Bolt down supports used for securing on to concrete hard standings.
Available Size: 50 x 50mm, 75 x 75mm and 100 x 100mm
Manufactured from galvanised mild steel and powder coated for long life.
FENCE POST REPAIR SPIKE
Solves the problem of rotted posts that have broken off at ground level but are in sound concrete base.
Available Size: 75 x 75mm
Manufactured from galvanised mild steel and powder coated for long life.
CONCRETE IN POST SUPPORT
Use in hard standing areas or where
ground conditions prevent the use of
post support spikes.
Ideal for carports, pergolas, raised decks and general fencing.
Available Size: 75 x 75mm and 100 x 100mm
Manufactured from galvanised mild steel and powder coated for long life.
BRICK REINFORCEMENT COIL MESH
Used primarily as anti-cracking reinforcement in the construction of brick and block masonry.
Available sizes: 63, 112, 175, and 225mm widths x 20m rolls.
Galvanised manufactured from steel to DX51 BS EN 10142 g275)
Stainless manufactured from steel to BS EN 10088-2 grade 1.4301
SOFFIT MESH
Black plastic mesh used to prevent birds and insects entering soffits, vents, ventalation areas and roofs.
Available sizes: 75mm wide x 30m roll - alternate sizes available on request.
Contact the sales team for further info.
Manufactured from UV-Stabilised plastic with fine 2mm holes
Also available in stainless steel
RESTRAINT STRAPS
Horizontal and vertical straps designed to be used when connecting timber floor and roof systems to masonry walls.
Heavy duty, light duty and roll edged variations available.
Edge coated galvanised or stainless steel.
FLAT STRAP
Dimensions
Heavy Duty: 27mm wide x 4.0mm thick
Light Duty: 27mm wide x 2.0mm thick
Roll Form: 36mm wide (unrolled) x 1.2mm thick or 27mm (rolled) x 1.2mm thick
Straight, bent or twisted in 100mm increments.
LIGHT DUTY ANGLE BRACKETS
A multi-purpose fixing for most 90 degree connections, ideal foruse on site for many substrates.
Adjustable, inexpensive and
versatile angle bracket range.
Available sizes: 60 x 60 x 40mm,
50 x 50 x 63mm and 50 x 50 x 35mm
2.0mm pre-galvanised mild steel
HOW TO ORDER RESTRAINT STRAPS
HEAVY DUTY ANGLE BRACKET
A multi purpose fixing for most 90 degree connections, ideal for use on site for many substrates.
Adjustable, inexpensive and versatile with reinforced ribs for added strength.
Available sizes: 90 x 90 x 63mm,
150 x 90 x 63mm and 150 x 150 x 63mm
2.0mm pre-galvanised mild steel
UNIVERSAL FRAMING ANCHOR
The most effective method of providing strong, mechanical joints for framing of timbers. The unique bending slot allows accurate onsite bending for all 2 and 3 way ties. The reversible design is ideal for a variety of connections.
Universal size: 76 x 125mm
Galvanised mild steel
HAND NAIL PLATE
A nail plate system which enables the structures on site to strengthen joints for non structural applications. Automated construction ensures uniform hole positions.
Fix on each side of the timber joint using 30 x 3.75mm square twist nails in all available nail holes.
Available Widths: 50, 75, 100mm and lengths in 50mm increments.
1.0mm pre-galvanised mild steel manufactured to BS EN 14545:2008
CE Cert No: 1224-CPR-1162
HERRINGBONE STRUT
Lateral support between timber floor joists. Giving superior bracing over unreliable, slow and costly timber noggins.
Available size: 400 mm
1.0mm pre-galvanised mild steel
MULTI TRUSS HANGER
Supports multiple trusses from primary girder, purlin to beam connections and main trimmer joists. Used for joining timber to timber, masonry or concrete.
Available in all timber widths.
Overall lengths: 240, 320, 380, 500 and 620mm
2.0mm galvanised mild steel
GIRDER TRUSS SHOE
Used to attach and support roof trusses from girders & trusses. Higher qualified load performance and increased hole centres to spread load over greater area.
Available sizes: 38, 50, 75, and 100mm
0.9mm pre-galvanised mild steel
TRUSS CLIPS
Attaches trusses and rafters to wall plates to provide wind restraint.
Avoids skew nailing damage and provides positive resistance to wind forces.
Available sizes: 38, 44 and 50mm
0.8mm pre-galvanised mild steel
ONE PIECE JOIST HANGER
A non welded construction for supporting timber joists and structural composite timber from masonry walls.
Straddle to comply with fire regulations in party wall applications.
Available Sizes: Joist Widths 38, 44, 50, 75 and 100mm
Joist Depths 100, 125, 150, 175, 200 and 225mm
Straddle, hook over and welded hangers are available on request.
2.0mm galvanised mild steel
JIFFY HANGER
A quick and safe method of joist trimming for light, medium and heavy duty applications such as supporting floor joists, trimming stair wells and underslung joists.
Short, Standard and Extended leg are available in the following
widths: 38, 44, 50, 63, 75, 88, 100, 125 and 150mm
Short & standard leg 0.7mm galvanised mild steel
Extended leg 1.0mm galvanised mild steel
MINI HANGER
Support of short span joists, trap hatches and in-fill timbers in roof space.
Designed for fast and economical light duty
applications.
Available sizes: 38, 44, 47 and 50mm
0.8mm galvanised mild steel
SPLICE PLATE
For butt jointing timbers of a similar cross section with no need to drill and screw which causes weak points.
Fix using 30 x 3.75mm square twist nails in all available nail holes.
Available sizes: 350 x 87mm with 13mm lip or
400 x 57mm with 18mm lip
1.0mm galvanised mild steel
Manufactured to BS EN 14545:2008 and BS EN 912:2011
MULTI PURPOSE FIXING BAND
Ideal for general bracing on site.
Can be cut, bent and formed with ease for all types of light fixing applications.
Available sizes: 12mm x 10m,
20mm x 10m and 50mm x 10m
Galvanised or stainless steel available.
0.7mm galvanised mild steel
0.5mm stainless steel
WALL STARTER KIT
For all internal & external applications from 60 to 250mm wide and up to 3 stories high, featuring the twist, lock and slide wall tie.
Our 'Wall Starter Kit' contains all the necessary fixings for a single skin of masonry up to 2.4mtr (8 feet) high. 2 x 1.2mtr interlocking lengths of wall connector channel. (8 x wall ties, 5 x coach screws, washers and wall plugs)
Connector Channels and Wall Ties - 0.5mm stainless steel
Coach Screws - M6 x 50mm stainless steel
Masonry Plugs - High density polythene
SQUARE PLATE WASHER
Use under bolt head and tail nut. Spreads the load of bolt head around the hole, thereby avoiding fretting and timber damage.
Available sizes: 50 x 50mm
M10, M12, M16 or M20 hole available.
2.5mm galvanised mild steel
DOUBLE SIDED TIMBER CONNECTOR
For all applications to enhance bolt performance by reducing timber rotation and joint movement. Place between timbers on an M12 bolt prior to tightening.
50mm Diameter
1.0mm galvanised mild steel
Manufactured to BS EN 912:2011
PROTECTOR PLATE
Install over the utilities passing through timber studs. Prevents piercing water pipes or electrical cables with nails/screws. Unique integral metal teeth press into timber. No nails required.
Available size: 45 x 90mm
1.0mm galvanised mild steel
HIP IRON
Screwed to rafter and embedded in mortar at base of hip to prevent ridge tiles from slipping off.
Available size: 4mm
Other sizes and baby hip irons available on request.
4.0mm edge coated galvanised mild steel
GALLOW BRACKET
Support bracket for removing internal chimney breast.
Available size: 490 x 375 x 50mm
Post manufacture galvanised mild steel
TYPE 4 HOUSING TIE
Place across cavity and tie two skins by embedding in mortar. Can be used either way up.
Available sizes: 200mm for 50 - 75mm cavity or 225mm for 76 - 100mm cavity.
Stainless steel. BBA (Cert. No. 03/4072) & NHBC Approved.
TYPE 2 WALL TIE
Place across cavity and tie two skins by embedding in mortar.
Includes drip to allow moisture to run off.
Available sizes: 200mm for 50 - 75mm cavity
225mm for 76 - 100mm cavity
250mm for 76 - 120mm cavity
Stainless steel. NHBC Approved
TIMBER FRAME TIE
A truly flexible tie which secures brick and blockwork
cladding to the timber frame structures up to and including
4 stories. Fix using the supplied stainless steel annular ring
shank nail.
Available sizes: 50-75mm cavity and 100mm cavity
Stainless Steel
SAFETY FRAME CRAMP
To tie timber door/window frames to adjacent brickwork.
Available sizes: 100, 125, 150, 175, 200, 225, 250mm (with additional 50mm upstand).
These can also be manufactured with a drip to prevent moisture crossing the cavity.
2.0mm pre-galvanised mild steel
2.0mm stainless steel
MOVEMENT TIE
Used to allow masonry to expand or contract. Suitable for vertical movement joints. Designed for use with a debonding sleeve.
Safety End/Plain End or
Safety End/Safety End available.
Available sizes: 150, 175, 200, 225, 250 or 300mm
2.0mm Pre-galvanised mild steel
2.0mm Stainless steel
DEBONDING SLEEVE
To allow for thermal movement of a structure, debonding sleeves are fitted to the movement ties to allow movement whilst supporting horizontal or vertical loading.
Available Size: 20 x 100mm
Manufactured from corrosion proof polythene
INSULATION DISC
Universally designed insulation retaining disc available in an 80mm diameter. Featuring a firm grip design that will not move on the wall tie; retaining discs are clipped on to wall ties either before building or in situ.
Manufactured from injection moulded polypropylene
HEAVY DUTY STAND OFF POST
Ideal for use with porch posts etc.
Available sizes: 80 x 80, 100 x 100 or
150 x 150mm
Additional sizes can be manufactured.
5mm galvanised mild steel
KNEE RAIL STRAP
Used to secure the top rail of a knee rail fence to the upright post.
Knee rail straps are supplied flat or with one 90 degree bend which can then be installed , bent into shape and secured with nails.
Available sizes : 100 x 475 or 75 x 475
Pre- galvanised mild steel
DRIVE IN TOOL
Designed to aid the installation of 75mm & 100mm fence post spikes without causing damage. Fitted with a 10mm steel rod for ease of use.
Available sizes: 50 x 50mm,
80 x 80mm
GRAVEL BOARD CLIP
Gravel board clips for fitting fence base boards securely to wooden posts.
Available size: 225 x 50mm
1.0mm Pre-galvanised mild steel
SCREW IN TIE
Universal frame tie for connecting wood frames to masonry. Zinc and yellow passivated.
Available in one size.
